Celtic Cross Ring — .925 Sterling Silver with Oxidized Detail
SKU: 1001
Each arm of the cross ends in three small rounded buds, the form heraldry calls a cross bottony. It sits raised inside a hammered diamond frame on a 14mm by 15mm shield face, with a tiny cross in each of the four corners. This Celtic cross ring is cast in solid .925 sterling silver, oxidized in the low spots so every carved line stands out against the polished surface.
Who This Is Actually For
If you wear your faith visibly — The Celtic cross on this ring isn't a subtle hint. It takes up the whole shield face, readable without leaning in. A plain cross repeats on each side of the band, so the symbol still shows when your hand is turned.
If you have Irish or Celtic heritage — The Celtic side of this ring lives in the scroll curls around the diamond frame, not in a ring around the cross — it is a budded cross, not the ringed High Cross shape. If the ring-around-the-arms form is what you're after, choose a ringed design instead.
If you want a band that stays put — The shield face locks the ring in position on your finger. It doesn't spin or drift. The textured sides add grip against skin, so it sits where you place it all day.
What It's Like to Use (The Honest Take)
The oxidized darkening sits in the recesses of the cross and the textured band. It's not a coating — the silversmith applies a chemical solution that reacts with the silver surface. Over time, daily handling polishes the raised areas while the low spots stay dark. That contrast sharpens with wear rather than fading.
The inner band is smooth. No engraving, no ridges — just polished silver against skin. At 13 grams, this ring sits in the mid-weight range for sterling silver. You notice it for the first hour. After that, it disappears.
The shield shape has one habit worth knowing. Because the textured sides keep the face from rotating inward, the two upper corners of the 14mm × 15mm shield stay pointed outward, so they can snag the lining as you push your hand into a trouser or jacket pocket. Tilt the hand slightly and it slides in clean.
The Specs — And What They Actually Mean
Questions You're Probably Asking
Q: What kind of cross is on this ring?
A cross bottony, also called a budded cross: each arm ends in three rounded buds. It sits raised inside a hammered diamond frame at the center of the 14mm × 15mm shield face, with a small cross in each corner. There is no circle around the arms, so it is not the ringed High Cross form.
Q: How much does the hand-oxidizing vary between pieces?
Each ring is oxidized by hand, so the exact darkening pattern shifts slightly from piece to piece. The recipe stays the same: dark low spots across the 14mm × 15mm shield face and textured band, high polish on the raised cross and diamond frame, and a .925 hallmark stamped inside every band.
Q: Does the shield face keep the cross from turning sideways?
Yes, the weight and width of the face do that job. With 13 grams of sterling and a 14mm × 15mm shield sitting on top, the mass settles on the back of your finger, and the textured sides grip skin so the cross keeps facing forward. The inner band stays polished smooth.
Quick Specs & Real-World Performance
You Might Also Want
If you like the Celtic tradition but want a wider band, the Celtic Crown Sterling Silver Band Ring runs 14mm wide with a sculpted crown over a scrolled channel and a single CZ — same heritage, bolder presence on the finger.
For a matching pendant, the Celtic Cross Sterling Silver Pendant puts a knotwork-covered cross inside a 25mm × 50mm rope-bordered frame — the interlace this ring leaves out, worn at the chest instead of on the hand.
Browse the full cross rings collection for other cross designs in sterling silver — Gothic, Templar, and plain Latin cross styles beyond the Celtic form.
